Welcome To E POWER
EP IG SERIES
EP IG SERIES
1 Phase in / 1 Phase Out
5 KVA - 20KVA
Application
IT INFRATRUCTURE
TELECOM
MEDICAL EQUIPMENT
DATA PROCESSING EQUIPMENT
MACHINE TOOLS & ROBOTICS
BANK & FINANANCE
FEATURES
Microprocessor based intelligent UPS system suitable for IT and Medical Equipment Load with unity power factor and a wide input voltage Window of 140-300 with an overall efficiency reaching 95%.
It requires minimum battery sizing (lesser no. of Batteries 8Nos- 20Nos).
The peak surge handling capacity of 300% for 3000msc.
True Inbuilt Isolation Transformer by design@ output.
IGBT based Rectifier & charger.
Control Designed to withstand all kinds of load.
Intelligent Battery Management to Prolong Battery Life Cycle.
High Input Power factor >0.99.
High Reliability Digital control.
N+1 hot standby option uptolOunits.
Wide Input Voltage Range.
Inbuilt Manual Bypass Switch.
Emergency Power off (EPO) Switch.
Technical Specification
| MODEL | EPIG2005 | EPIG2010 | EPIG2015 | EP1G2020 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 5KVA | 10KVA | 15KVA | 20KVA | ||||||||
| INPUT | ||||||||||||
| Nominal Voltage | 220V/230V/240V AC (1Ph+N+PE, 3 Wire) | |||||||||||
| Operating Voltage Range | 140V~280V AC Load Dependent | |||||||||||
| Operating Frequency Range | 50 Hz + 1% (Auto Sensing) | |||||||||||
| Power Factor | >0.9 | |||||||||||
| OUTPUT | ||||||||||||
| Output Voltage/Power Factor | 220V / 230V / 240V AC / £1% / 0.8 Std., 0.9 Optional | |||||||||||
| Output Frequency | Auto Sensing 50Hz | |||||||||||
| Harmonic Distortion (THDv) | <2% (Linear load), <5% (Non Liner Load) | |||||||||||
| Crest Factor | 3:1 | |||||||||||
| Efficiency | Up to 94% Dual Conversion Mode, 99% ECO Mode | |||||||||||
| BATTERY | ||||||||||||
| DC Voltage | 96V/120V | 180/192V | 192v | 192 | ||||||||
| Charge Current | 10% of the Rated Battery AH | |||||||||||
| Typical Recharge Time | 8 Hours (90% of full capacity) | |||||||||||
| SYSTEM FEATURES | ||||||||||||
| LCD Indication | Input Voltage/Frequency, Output Voltage/Frequency | |||||||||||
| LED Indication | Load Level, Battery Level, Line On, Battery On, Inverter On, By Pass, Fault & Reset Button | |||||||||||
| Alarms / Protection | Batt. Low, DC High, Inverter Under/Over Voltage, UPS Over Load, Short Circuit, Fan Failure and UPS Fault. | |||||||||||
| Overload Capability | < 125% for 10 min, >125-150% for 1 min, >150% for 200 ms | |||||||||||
| Transfer Time | AC to Battery : Oms, Inverter to Bypass : 4ms (Typical) | |||||||||||
| ENVIRONMENTAL | ||||||||||||
| Temperature | Operating: 0~40°C, Storage: -10°C ~ 55°C | |||||||||||
| Humidity / Altitude | 0~95% RH Non-condersing / <1500 M | |||||||||||
| Noise | Low Audible Noise Level | |||||||||||
| PHYSICAL | ||||||||||||
| Dimension WxDxH (mm) | 12x22.5x21 | 12x22.5x21 | 12.5x22.5x25 | |||||||||
| Weight (Kg) | 5Kg | 35Kg | 38Kg | 40Kg | 45Kg | 50Kg | 60Kg | 70Kg | 75Kg | |||
| STANDARDS | ||||||||||||
| Quality | 150 9000, 1SO 14001, OHSAS | |||||||||||
| Safety | IEC/EN62040-1 | |||||||||||
| EMC / Performance | IEC/EN62040-2; IEC/EN62040-3, Complying to CE | |||||||||||
| COMMUNICATION INTERFACE | ||||||||||||
| Standard | RS-232 Optional | |||||||||||
| Optional | SNMP / ModBus / Dry Contact / USB / RS-485 | |||||||||||
| Technology | Online Double conversion AC-DC-AC with high switching frequency VFI Inversion Technology | |||||||||||
